Your product selection
Donut load sensor RC 300 light
Our RC-light series donut sensors are capable of measuring weight on any rope, harness, or other load-bearing device. The sensor is calibrated using weights in the cabin.
The sensors are ready for use after calibration with weights and only need to be connected to an AElight 8,12, 16 or XNUMX evaluation unit.
Technical data:
max. eyebolts | Ø 12,5 mm (M12) |
roughly corresponds to rope | Ø 4 - 8 mm |
Application | 0 - 300 kg |
Diagonal pull compensation | 10° |
Limit load | 600 kg |
breaking load | 1200 kg |
Sensor height | 52,4 mm |
Sensor Ø | 40,0 mm |
Length of connection cable | 2,5 m |
Protection class | IP 20 |
Back to category
Information
Article no.: 456 350