Thanks to its patented measuring principle, the time-consuming calibration with weights on the elevator is no longer necessary. The belt sensor is suitable for belts with a width of 30 mm and 60 mm and is ready for immediate use. Thanks to an eccentric lever, the sensor is installed in the belt within seconds. The sensor has a 0,8 m long connecting cable.

• Belt widths: 30mm + 60mm
• Scope of application: 0 – 500 kg / 0 – 1100 lbs (± 2,5% FSR)
• Limit load: 1000 kg / 2200 lbs
• Breaking load: 2000 kg / 4400 lbs
• L x W x H / L x W x H (mm): 230 x 120 x 82
• Length of connection cable: 0,8 m
• Temperature range: 0 ° C - 70 ° C

Mobile belt sensor LSM Belt for Otis load-bearing means (30 mm + 60 mm) (recognizable by the blue lever)

Article no. 455805

Mobile belt sensor LSM Belt for Schindler Load-bearing means (30 mm + 60 mm) (recognizable by the red lever)

Article no. 455806

Mobile belt sensor LSM Belt for CONTI Tech Polyrope (25 mm – 6 x 2.0 DP) (recognizable by the orange lever)

Article no. 455807

Mobile belt sensor LSM Belt for CONTI Tech Polyrope (25 mm – 6 x 2.0) (recognizable by the orange lever)

Article no. 455808

Consisting of:

• 3 sensors LSM Belt (Art. No. 455805, Art. No. 455806, Art. No. 455807 or Art. No. 455808)
• Robust carrying case for max. 5 mobile belt sensors LSM-Belt

Required: 
Mobile evaluation unit MSM 12
Article no.: 455105, 455106 or 455107

Additional rope load sensors (LSM1, LSM2, LSM XL or LSM Belt) can can be ordered additionally.