Skip to main content

Overload measurement WeightWatcher BEAM

When developing the WeightWatcher Beam, our development department was able to incorporate the know-how acquired over many years. Particular emphasis was placed on ease of installation and the desire of many customers for an inexpensive, yet high-quality overload measuring system that meets the requirements of EN 81. The WeightWatcher Beam 5000 is therefore particularly handy, making it suitable for installation in many different situations. Even tightly laid ropes or low shaft heads do not pose a problem.

Information

BEAM 5000
Article no. 456250

BEAM 5000 CANopen
Article no. 465255
EDS Files

Weight Watcher BEAM 5000

number of sensors
1
Application range kg
500 – 5000 kg / 1100 – 11000 lbs
Limit load
12500 kg / 27500 lbs
Calibration after installation
ja
Supply voltage
12 - 28 VDC
input
0,8 W
Max. switching voltage
250 V AC/220 V DC
Max. inrush current
30 V DC 1 A / 125 V AC 0,3 A
Max. continuous current
30 V DC 1 A / 125 V AC 0,3 A
Max. switching capacity (resistive load)
62 VA
Max. switching capacity (industrial load)
62 VA
Min. switching load
10 mV DC 0,01 mA
Hold Input
12 – 230 VAC/DC
Display
LED, 4-digit
Service
3 buttons
Cabin weight measurement
Strain gauges
Temperature range
0 ° - 70 ° C
Length of connection cable
2,5 m
Weight
940 gr

Back to category

Overload measurement